• Fastener designed to attach steel roofing & siding used in post-frame & residential metal roofing applications.
• Threads transition from fine to coarse to generate superior holding strength in various wood substrates.
• Micro-Bit™ point reduces metal shavings that can embed themselves in the rubber washer.
• EPDM rubber is vulcanized to a steel washer to form an excellent seal even when driven at an angle.
• Available in ALL COLORS in the following sizes: 1″, 1 1/2″, 2″

• Fastener designed to attach steel roofing & siding used in post-frame & residential metal roofing applications.
• 5/16” cupped HWH with a molded ZAMAC Zinc-Aluminum alloy provides lifetime protection against red rust on the head & washer.
  • (You may obtain a free copy of the written warranty upon request.)
• ZXL™ is an excellent choice for GALVALUME & other long-life metal roof panels.
• Threads transition from fine to coarse to generate superior holding strength in various wood substrates.
• Micro-Bit point reduces metal shavings that can embed themselves in the rubber washer.
• Available in ALL COLORS in the following sizes: 1.5″
• Available in SELECT COLORS in the following sizes: 1″, 2″

• Designed to be used as a “rescue screw”. This fastener will replace nails or smaller diameter fasteners that have loosened & backed out of steel roofing over time.
• 5/16” HWH with bonded sealing washer will completely cover the existing hole, even if elongated by movement in the metal roof.
• Type 17 point will help clean the existing hole so that oversized threads can tap & generate maximum holding strength.
• EPDM rubber is vulcanized to the steel washer to prevent delamination & form an excellent seal even when driven at an angle.
• Available in ALL COLORS 2” ONLY

• Fastener designed to attach metal roof and sidewall panels used in pre-engineered metal building applications.
• #12 Diameter 5/16” Cupped HWH self-drilling fastener easily penetrates steel up to .210” in thickness with no “point walking.” 1/4” Stitch will securely fasten panel sidelaps up to 18 ga. panel thickness with no strip-out when installed correctly.
• Cupped head & washer encapsulate EPDM rubber washer & provide a secure seal even when driven at an angle.
• Standard SteelBinder available in ALL COLORS. 1.25″ ONLY
• Stitch/Lap SteelBInder available Bare (non painted) and 7/8″ ONLY.

• Manufactured from EPDM or silicone rubber, ROOFJACK RD™ is compounded for maximum resistance to ozone, UV light, & temperature extremes.
• Flexible aluminum base will allow the flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant & self-drilling screws complete the installation.
• RoofjackRD are well marked so they can easily be cut with shears to fit exactly the pipe size used.
• RoofjackRD are available in Gray EPDM.

• Manufactured from EPDM or silicone rubber, Roofjack™ is compounded for
  maximum resistance to ozone, UV light, & temperature extremes.
• Flexible aluminum base will allow the flashing to conform to any metal roof
  configuration. Pipe location can be centered in the flat of the panel or the rib.
  Urethane sealant & self-drilling screws complete the installation.
• RETROFIT Roofjack are well marked so they can easily be cut with shears to
  fit exactly the pipe size used.
• RETROFIT Roofjack are used in applications for which a standard flashing will
  not work. It wraps around the pipe instead of pulling down over the pipe.
  Hardware is included to ensure a watertight connection.
• Fastener snaps & cable tie are included.

• Designed to close gaps in roof & sidewall applications. Material is pre-cut to conform to metal panel configurations.
• Applications include closing the openings at the ridge (peak of the building) or at the eave (gutter-line of a building).
• 1.8 lb. Density polyethylene foam is designed to withstand harsh weather elements including moisture & ultraviolet rays.
• Pre-applied adhesive helps to keep closure in place before roof panel is fastened.
• Interlocking dovetails provide a secure end-to-end fit, eliminating any potential gaps.

• AST is a self-adhering foam tape impregnated with water-based acrylic-modified asphalt emulsion.
• It is an excellent alternative to butyl tape & open-cell polyurethane foam strips.
• Will not dry out and become hard and brittle.
• UV-stable.
• Highly resistant to bugs and vermin.
• Will not extrude from between joints like caulk or butyl tapes.
• Conforms to contours and fills gaps.
• Maintains a seal during thermal expansion and contraction of building panels.
• Excellent compressibility and recovery (minimal compression set).
• Good thermal and sound insulator.
• No shrinkage or blow-out due to closed-cell breakage.
• Supplied with self-adhesive on one side. After removal of packaging, material begins gradual expansion – more slowly in cold weather than in hot.

• 2300^® Construction Tripolymer Sealant is a single component, high-performance elastomeric sealant for use in a wide variety of roofing, trim, architectural metal, manufacturing, underdeck system, solar roof system, and general construction applications.
• Available in crystal clear in a clear plastic cartridge.

FT SILVER is a contractor grade steep slope roofing underlayment, it is a cost effective, and reliable #30 felt replacement product.

• Easy to install
• 5X more coverage per roll as compared to #30 felt.
• Wrinkle- free surface that lays flat, and stays put with its underside non-slip coating.
• Designed for use under; primed cedar, asphalt, synthetic shingles, and residential metal roofing.